Pioneer AIRWARE User Guide - Page 8
Setting Up, Connecting to a stereo, Receiving the XM signal - xm receiver
UPC - 012562760858
View all Pioneer AIRWARE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting Up Assembly Insert the battery and assemble your AirWare and its home stand as shown; plug the AC adaptor into an outlet. Let the battery charge for at least three hours. Connecting to a stereo Plug the AC adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers. Connect to stereo Insert battery Important! You will need to fully charge your AirWare battery for at least three hours to have sufficient battery power for portable use. Receiving the XM signal Turn your AirWare on by pressing the power button. You should be able to hear channel 1, the XM Preview Channel. If you do not, and the screen displays "NO SIGNAL," try moving your AirWare's antenna to another location. Make sure the antenna points south, either outdoors or through a window. If the "NO SIGNAL" message persists, refer to "Aiming the home antenna" (page 30). Please read the TIP below the illustration for optional setup and activation procedure information. Assemble home docking station 14 Aim antenna TIP: Establishing a good signal environment in the home or office setup is highly desirable, but this is not the only way you can receive the XM signal. As an option, you can refer to "Using AirWare In Your Vehicle" (page 31) and continue this setup and activation process with your AirWare installed in a vehicle. 15