Pioneer AVH-P6400 Operation Manual - Page 19

Tuner Section 05 English Español Deutsch Français Listening to the radio 1 4 2 4 To perform manual tuning, press 2 or 3 with quick presses. The frequencies move up or down step by step. 3 These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on page 20. This product's AF (alternative frequencies search) function can be switched on and off. AF should be off for normal tuning operation (refer to page 23). 1 BAND indicator Shows which band the radio is tuned to, MW, LW or FM. 5 To perform seek tuning, press and hold 2 or 3 for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. • You can cancel seek tuning by pressing either 2 or 3 with a quick press. • If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note • When the frequency selected is being broadcast in stereo the STEREO (ST ) indicator will light. 2 FREQUENCY indicator Shows to which frequency the tuner is tuned. 3 STEREO (ST) indicator Shows that the frequency selected is being broadcast in stereo. 4 PRESET NUMBER indicator Shows what preset has been selected. 1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed. 2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Press BAND/ESC to select a band. Press BAND/ESC until the desired band is displayed, FM1, FM2, FM3 for FM or MW/LW. En 19 Italiano Nederlands