Pioneer AVIC-7000NEX Installation Manual - Page 8
Connecting the power cord 1, Connection
View all Pioneer AVIC-7000NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section 02 Connection Connecting the power cord (1) Yellow To terminal supplied with power regardless of ignition switch position. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange/white To lighting switch terminal. Black (ground) To vehicle (metal) body. Note When a subwoofer is connected to this product instead of a rear speaker, change the rear output setting in the initial setting. (Refer to Operation Manual.) The subwoofer output of this product is monaural. Front speaker Left Rear speaker or subwoofer (4 Ω) White White/black Green Green/black With a two-speaker system, do not connect anything to the speaker leads that are not connected to speakers. Gray Gray/black Front speaker Violet Violet/black Right Rear speaker or subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with violet and violet/black leads of this product. Do not connect anything with green and green/black leads. Green Not used. Green/black Violet Violet/black Subwoofer (4 Ω) 2 8 En