Pioneer AVIC-90DVD Other Manual - Page 13

ENGLISH ESPAÑOL DEUTSCH This product Power cord Note: Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. Black, Orange/white, Red, Yellow ☞ See Page 13. Yellow/black When combining this navigation unit with a Pioneer car stereo, if the car stereo has yellow/black leads, connect them to those leads. In this way, when the guidance audio is output and when you operate the system by voice, the car stereo is automatically muted to reduce the car stereo volume. Purple/white (REVERSEGEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the car is moving forwards or backwards. Connect the purple/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your car traveling forward/backward properly, and thus the position of your car detected by the sensor may be misaligned from the actual position. Connection method Clamp the backup lamp lead. Clamp firmly with needle-nosed pliers. Note: When you use the ND-PG1 speed pulse generator (sold separately), please make sure to connect it. Fuse resistor Backup lamp lead. FRANÇAIS ITALIANO NEDERLANDS Check the position of your car's backup lamp (the one that lights up when the shift lever is in reverse [R]) and find the backup lamp lead in the trunk. 12