Pioneer AVIC N2 Installation Manual - Page 19

Chapter 1 How to Use Navigation Unit and Names of the Parts • Press PGM button to turn pause on when selecting the following sources: DISC - Built-in DVD drive S-DVD - DVD player/multi-DVD player M-CD - Multi-CD player To turn pause off, press PGM button again. • Press PGM button and hold to turn BSM on when selecting RADIO as the source. Press PGM button and hold until the BSM turns on. To cancel the storage process, press PGM button again. • Press PGM button and hold to turn BSSM on when selecting TV as the source. Press PGM and hold until the BSSM turns on. To cancel the storage process, press PGM button again. • Press PGM button to select the desired channel select setting when selecting XM as the source. Press PGM button repeatedly to switch between the following channel select settings: CH NUMBER (channel number select setting) - CATEGORY (channel category select setting) Protecting your unit from theft The front panel can be detached from the display unit to discourage theft, as described below. Important: • Never use force or grip the display and the but- tons tightly when removing or attaching. • Avoid subjecting the front panel to excessive shocks. • Keep the front panel out of direct sunlight and high temperatures. • After detached the front panel, keep it in the safe place not to result in scratching or damage. • Attach the front panel while driving, or else may result in scratching or damage. Removing the front panel 1 Press DETACH button to remove the front panel. 2 Gently grip the right side of the front panel and slowly pull it outward. Take care not to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage. Attaching the front panel • Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks. 17