Pioneer AVIC-X910BT Installation Manual - Page 7
Parts supplied, Connecting the System - remote
UPC - 000125629513
View all Pioneer AVIC-X910BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting the System ! Do not connect this lead to the system control terminal of external power amps. ! Be sure not to use this lead as the power supply lead for the auto-antenna or antenna booster. Such connection could cause excessive current drain and malfunction. Notice for the blue/white lead ! When the ignition switch is turned on (ACC ON), a control signal is output through the blue/white lead. Connect to an external power amp's system remote control terminal (max. 300 mA 12 V DC). The control signal is output through the blue/white lead, even if the audio source is switched off. ! Do not connect this lead to the auto-antenna relay control terminal or the antenna booster power control terminal. ! Be sure not to use this lead as the power supply lead for the external power amps. Such connection could cause excessive current drain and malfunction. Parts supplied Parts marked (*) are not supplied with AVICX710BT. Extension lead* (for speed signal) RCA connector Section 03 GPS antenna Microphone English The navigation unit Power cord Connector* Extension lead (for reverse signal) En 7