Pioneer AVICN5 Owner's Manual - Page 138
Other Functions, Customizing the AV Source Setting
UPC - 012562890166
View all Pioneer AVICN5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Chapter 09 Customizing the AV Source Setting 2 Touch number key to enter the new PIN code. Bluetooth Device (BD) address PIN code Version of the Bluetooth module System (microprocessor) version 3 Touch [Enter] to fix the new PIN code. p The default setting of the PIN code is 0000. Switching the sound muting/ attenuation Sound from this system is muted, attenuated or mixed automatically in the following cases: ! When a call is made or received using a cellular phone connected to navigation system. ! When the voice guidance is output. p The sound muting/attenuation function does not work when you use a cellular phone connected to the navigation system via the Bluetooth adapter, which is sold separately. p When 5.1CH setting is [On], the sound muting/attenuation setting is not available. % Touch [Mute Input/Guide] in Initial menu. Each touch of [Mute Input/Guide] changes the settings as follows: ! Mute - Muting ! ATT - Attenuation ! Normal - Volume does not change p Operation returns to normal when the phone connection (the mute signal on the yellow/black lead) is ended or when the navigation guidance is ended. p Even when you receive a phone call, navigation voice guidance cannot be attenuated or muted. Use [Volume] to control the navigation voice guidance volume. Switching 5.1CH setting When the navigation system is combined with the multi-channel processor system (e.g. DEQP8000 and AXM-P8000) (sold separately), you can use the multi-channel sound. Enter the following setting when combining the multi-channel processor system. CAUTION DO NOT enter this setting before you connect the multi-channel processor system. (If this setting is entered, the RCA ("SUBWOOFER OUTPUT or NON-FADING OUTPUT") will output maximum volume for the multi-channel processor system.) Pioneer is not responsible for any damage to the speaker equipment caused by ignoring this warning. p This setting is possible only when the optical cable connection box (supplied with the Multi-channel processor) is connected to the navigation system. % Touch [5.1CH] in Initial menu. If you touch [5.1CH], it will be turned [On]. If you touch [5.1CH] again to turn [Off]. Other Functions Selecting the video for "Rear display" You can choose either to show the same image as the front screen or to show the selected source on the "Rear display". 138 En