Pioneer AVM-P9000R Owner's Manual - Page 87
Troubleshooting - dsp
View all Pioneer AVM-P9000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Troubleshooting 7 General (continued from previous page) Symptom Sound is not heard over a specific speaker. No images come on. Cause The speaker's Size is set to OFF. Remedy Make the correct Size setting for the speaker. (See page 60.) The speaker's Level is set to too low a position. Increase the speaker's Level setting to get the balance right with the other speakers. (See pages 68 and 72.) The center speaker's Size is set to SMALL or LARGE whereas no center speaker is installed. Set the center speaker's Size to OFF. (See page 60.) The parking brake cord is not connected. Connect the parking brake cord and engage the parking brake. The parking brake is not engaged. 7 Audio/DSP Symptom Speakers are not available to be adjusted. Time Alignment is not available. The subwoofer is not available to switch its phase. Bass content is not heard. Cause Their Size settings is at OFF. Remedy Make the correct Size settings. (See page 60.) Listening Position is not set cor- Set Listening Position correctly. rectly. (See page 59.) Their Size settings is at OFF. Make the correct Size settings. (See page 60.) The subwoofer is set to OFF. Set the subwoofer to the ON position. (See page 60.) The subwoofer is set to OFF and yet other speakers are set to OFF or SMALL in Size. Make the correct settings. (If no subwoofer is installed, the front or rear speaker needs set to LARGE.) (See page 60.) 86