Pioneer AVX-7000 Manual - Page 3
DIN Front/Rear-mount, DIN Front-mount - parts
View all Pioneer AVX-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
• Before finally installing this product, connect the wiring temporarily, making sure it is all connected up properly, and this product and the system work properly. • Use only the parts included with this product to ensure proper installation. The use of unauthorized parts can cause malfunctions. • Consult with your nearest dealer if installation requires the drilling of holes or other • modifications of the vehicle. • Install this product where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. • If installation angle exceeds 30° from horizontal, this product might not give its optimum performance. 30° DIN Front/Rear-mount This product can be properly installed either from "Front" (conventional DIN Front-mount) or "Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of product chassis). For details, refer to the following illustrated installation methods. DIN Front-mount Installation with the rubber bush 2 1 182 53 3 4 1. Dashboard 2. Holder After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them. (Install as firmly as possible using the top and the bottom tabs. To secure, bend the tabs 90 degrees.) 3. Rubber bush 4. Screw