Pioneer AVX-7000 Manual - Page 4
DIN Rear-mount - installation
View all Pioneer AVX-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Removing this product. 5 5. Frame Pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.) 6 6. Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place. Keeping the keys pressed against the sides of the unit, pull the unit out. DIN Rear-mount Installation using the screw holes on the side of this product. 7 * * 5. Frame Pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.) 7. Select a position where the screw holes of the bracket and the screw holes of this product become aligned (are fitted), and tighten the 8 screws at 2 places on each side. Use any of truss screws (4 × 3 mm), truss screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on 10 the shape of the screw holes in the bracket. * Use truss screws (4 × 3 mm) only. 8. Screw 9. Factory radio mounting bracket 10. Dashboard or Console 9