Pioneer BDP-23FD Owner's Manual - Page 35
Adjusting the audio
UPC - 012562952253
View all Pioneer BDP-23FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
• Prog.Motion is disabled when Pure Cinema is set to On. • Black Setup has the effect only for pictures output from the VIDEO output terminals. • YNR, CNR, BNR and MNR have no effect on 1080/24p video signals output from the HDMI OUT terminal. Closing the Video Adjust screen Note 05 • This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby Digital audio signals of BDs and DVDs. • When Auto is selected, the setting has the same effect as High or Off for Dolby TrueHD signals, depending on the content. For Dolby Digital Plus and Dolby Digital, the setting has the same effect as Off. Press HOME MENU. About Pure Cinema There are two types of video signals: • Video material - Video signals recorded at 30 frames/second • Film material - Video signals recorded at 24 frames/ second "Pure Cinema" uses signal processing suited for "film material" when converting 480i or 1080i interlaced video signals into progressive video signals, resulting in clear picture reproduction without losing the quality of the material. • Audio DRC affects the audio signals output from the following audio output terminals: - Analog audio signals output from the AUDIO OUT terminals. - Linear PCM audio signals output from the DIGITAL OUT terminal or HDMI OUT terminal. • The effect may be weak for some discs. Adjusting the output level of the different speakers during BD/DVD playback (Channel Level) is displayed on the disc information screen when playing the "film material" pictures of BD-ROM, BD-R/-RE and DVD-Video discs (page 26). Adjusting the audio Caution • Channel Level of the speakers set to None or No at Speaker Setup cannot be adjusted (page 42). 1 During playback, display the TOOLS menu. Press TOOLS. TOP MENU TOOLS 2 Select and set Audio Adjust. Use / to select, then press ENTER. HOME MENU ENTER RETURN 3 Select and set Channel Level. Use / to select, then press ENTER. Adjusting the Audio DRC Audio DRC (Dynamic Range Control) has the effect of playing loud sounds softly and soft sounds loudly. Adjust the setting for example when viewing movies late at night and the dialogs are difficult to hear. 1 During playback, display the TOOLS menu. Press TOOLS. 2 Select and set Audio Adjust. Use / to select, then press ENTER. 4 Adjust the output level. Use / to select, / to adjust. The output levels of the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted within the range of -6.0 dB to +6.0 dB. L 0.0 dB C 0.0 dB R 0.0 dB SR 0.0 dB SBR 0.0 dB SBL 0.0 dB SL 0.0 dB SW 0.0 dB 3 Select and set Audio DRC. Use / to select, then press ENTER. 5 Press ENTER to set. 4 Adjust the setting. Use / to switch between Off, Low, Medium, High and Auto. Closing the Audio DRC screen Press ENTER or HOME MENU. Note • The adjustment of Channel Level is only applicable to the sound output from AUDIO OUT. • This cannot be adjusted when in the following cases: - Output Terminal is set to HDMI or DIGITAL AUDIO (page 46). - Audio Output Mode is set to 2 Channel (page 38). 35 En