Pioneer BDP-23FD Owner's Manual - Page 59
HDMI Audio Out
UPC - 012562952253
View all Pioneer BDP-23FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Problem Check Remedy 07 Sound and picture are not Is Output Terminal properly Set Output Terminal properly (pages 19 and 46). synchronized. set? Is Lip Sync properly set? Adjust the amount of audio delay with the Lip Sync setting (page 36). • No sound is output. • Sound is not output properly. Is the disc played back in slow motion? No sound is output during slow motion play and forward and reverse scanning. Is the disc played back in fast forward or fast reverse? Are the audio cables properly • Connect the cable properly according to the connected devices connected? (page 14). • Insert the cable firmly and all the way in. Is the audio cable damaged? If the cable is damaged, replace it with a new one. Are the connected Read the operating instructions of the connected components and components (AV receiver or check the volume, input, speaker settings, etc. amplifier, etc.) properly set? Are you trying to listen to the Audio signals are not output from the HDMI OUT terminal when video sound of the HDMI OUT signals are being output from the COMPONENT VIDEO or VIDEO terminal while watching the output terminals. When watching the picture of the COMPONENT picture from the VIDEO or VIDEO output terminals, connect an optical digital audio COMPONENT VIDEO or cable or regular audio cables to listen to the sound (page 17). Once VIDEO output terminals? connections are completed, use Setup Navigator to make the player's settings (page 19). Is HDMI Audio Out properly Set HDMI Audio Out to Auto or PCM. (page 39). set? Is Output Terminal properly When ANALOG AUDIO is selected at Output Terminal, no audio set? signals are output from the HDMI OUT or DIGITAL OUT terminal (page 46). Is the output video resolution Use OUTPUT RESOLUTION to switch to the resolution at which the properly set? video and audio signals are output (page 22). Is the AV receiver or To listen to 2-channel analog audio, connect to FRONT (L/R) of the amplifier, etc., connected to AUDIO OUT terminals (page 13) and set Audio Output Mode to 2 the AUDIO OUT terminals? Channel (page 38). Are the speakers properly set? When the AV receiver or amplifier, etc., is connected to the AUDIO OUT terminals and Audio Output Mode is set to Multi-channel, set Speaker Setup properly (page 42). Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI device is connected. Connect the device to a DIGITAL OUT terminal or the AUDIO OUT terminals (page 17). For some BDs, audio signals are only output from DIGITAL OUT terminal or the HDMI OUT terminal. Multi-channel sound is not output. Is Output Terminal properly Linear PCM (2-channel) audio signals are output from output terminals set? other than the one set at Output Terminal under Audio Out. Set Output Terminal properly (page 46). Is the audio output of the Read the operating instructions of the connected AV receiver or connected AV receiver or amplifier and check the audio output settings of AV receiver or amplifier, etc., properly set? amplifier. Is multi-channel sound selected? Use the menu screen or AUDIO to switch the disc's sound to multichannel. Is the AV receiver or When the AV receiver or amplifier, etc., is connected to the AUDIO amplifier, etc., connected to OUT terminals, set Audio Output Mode to Multi-channel (page 38). the AUDIO OUT terminals? Also, set Speaker Setup properly (page 42). Noise can be heard when outputting DTS Digital Surround signals from the DIGITAL OUT terminal. Is the connected AV receiver If an AV receiver or amplifier that is not compatible with DTS Digital or amplifier compatible with Surround is connected to the DIGITAL OUT terminal, set DTS Out to DTS Digital Surround? DTS PCM (page 38). 192 kHz or 96 kHz digital audio signals cannot be output from the DIGITAL OUT terminal. It is not possible to output 192 kHz or 96 kHz digital audio signals from this player's DIGITAL OUT terminal. The signals are automatically converted to 48 kHz or less for output. 59 En