Pioneer BDP-53FD Owner's Manual - Page 19

Connecting a TV  BDP-52FD 02 See Connecting an AV receiver or amplifier on the right BDP-52FD's rear panel column to connect an AV receiver or amplifier using an HDMI cable. Caution • Hold the plug when connecting and disconnecting the cable. • Placing a load on the plug could result in faulty contact and no video signals being output.  BDP-53FD Connect a TV to the HDMI OUT (MAIN) terminal. BDP-53FD's rear panel To HDMI input terminal Match the direction of the plug to the terminal and insert straight. It is also possible to connect to an AV receiver or amplifier using an HDMI cable (below). TV Direction of signal flow HDMI cable (commercially available) HDMI cable (commercially available) Match the direction of the plug to the terminal To HDMI and insert straight. input terminal It is also possible to connect to an AV receiver or amplifier using an HDMI cable (on the right column). TV Direction of signal flow It is also possible to connect a TV via AV reciever or amplifier to HDMI OUT (MAIN) terminal. See Connecting an AV receiver or amplifier on the right column. Caution • Make sure to connect a TV to HDMI OUT (MAIN) terminal, video signals cannot be output from HDMI OUT (SUB) terminal. • Make sure to set HDMI Mode to Single (page 43). Connecting an AV receiver or amplifier Connect to an AV receiver or amplifier in order to enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround. For instructions on connecting the TV and speakers to the AV receiver or amplifier, refer to the operating instructions for AV receiver or amplifier. Caution • Hold the plug when connecting and disconnecting the cable. • Placing a load on the plug could result in faulty contact and no video signals being output. 19 En