Pioneer BDP-53FD Owner's Manual - Page 42
Setting, Options, Explanation
View all Pioneer BDP-53FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
07 Setting Digital Output Options Bitstream Audio Output PCM Re-encode Off DTS Downmix (BDP-53FD) Stereo Lt/Rt Downsampling 48k 96k 192k DRC (Dynamic Range Control) * Only Dolby digital and analog audio signals are supported. Off On Auto Explanation Select this to output digital audio signals directly. Select this to output digital audio signals converted to PCM audio signals. Select this to output digital audio signals converted to DTS Digital Surround. Select this to output audio signals other than digital audio signals. DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital Surround audio signals converted to linear PCM audio signals are converted into 2-channel (stereo) signals for output. DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital Surround audio signals converted to linear PCM audio signals are converted into 2-channel signals compatible with Dolby Surround for output (when the connected AV receiver or amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the linear PCM audio signals as surround audio signals). Select this when playing a disc recorded with a sampling frequency of 48 kHz. Select this when playing a disc recorded with a sampling frequency of 96 kHz. Select this when playing a disc recorded with a sampling frequency of 192 kHz. Select this to output audio signals without using the DRC function. Select this to adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog or when watching movies at midnight. Select to switch the DRC setting On/Off automatically according to the input audio signal from the disc. 42 En