Pioneer BDP-53FD Owner's Manual - Page 49

5 Select and set Start. Press ENTER. 6 Downloading of the software start. 4 Select and set Options  Update  Disc or USB Storage  Start. 07 Use / to select, then press ENTER. The software download status is displayed on the screen. 5 Select and set Yes. • Depending on the Internet connection conditions, Use to select Yes, then press ENTER. software downloading may take a certain period of time. 6 Updating starts. • Software updating may take a certain period of time. 7 Updating starts. • Software updating may take a certain period of time. 8 Updating completes. This unit automatically restarts. 7 Updating completes. Restoring all the settings to the factory default settings  Updating using a USB memory device/disc Note • When an update file is provided on the Pioneer website, use your computer to download it onto a USB memory device or disc. Carefully read the instructions on downloading update files provided on the Pioneer website. • Store the update file in the root directory of the USB memory device or disc. Do not store it within a folder. • Do not put any files other than the update file on the USB memory device or disc. 1 Check that the player's power is turned on. 2 When playback is stopped, display the Home Menu screen. Press HOME MENU. 3 Select and set Initial Setup. Use / to select, then press ENTER. 4 Select and set Options  Load Default  Next Screen. Use / to select, then press ENTER. 5 Select and set OK. Use / to select, then press ENTER. • To update using a disc, use a CD-R or CD-RW disc. • The player supports USB memory devices formatted in FAT32/16. When formatting a USB memory device on your computer, do so with the settings below. - File system: FAT32 - Allocation unit size: Default allocation size • Only store the most recent update file on the USB memory device or disc. Note • After restoring all the settings to the factory default settings, use Setup Navigator to reset the player (page 24). • When all the settings are restored to the factory defaults, all the data for the secondary video (Picturein-Picture), secondary audio, bookmarks, etc., is erased. • Do not use a USB extension cable to connect a USB memory device to the player. Using a USB extension cable may prevent the player from performing correctly. • Steps 1 to 5 are the operations performed by the user. • Steps 6 to 7 are the operations performed (automatically) by the player (they are intended to update the software). 1 Plug in the USB memory device or load the disc on which the update file is stored. 2 When playback is stopped, display the Home Menu screen. Press HOME MENU. 3 Select and set Initial Setup. Use / to select, then press ENTER. 49 En