Pioneer BDP51FD Owner's Manual - Page 20

03 Chapter 3 Getting Started Making settings using the Setup Navigator menu Be sure to perform these settings when using the player for the first time. Caution • Before turning on the power, check that the connections between the player and other devices are correct. 1 Turn on the power. Press  STANDBY/ON. STANDBY/ON OPEN/CLOSE TV CONTROL INPUT SELECT CH VOL 2 Turn on the TV's power and switch the input. See the TV's operating instructions for instructions on operating the TV. Check that the Setup Navigator menu is displayed. If TV Control is set, the TV can be operated with the player's remote control (page 22).  If the Setup Navigator menu is not displayed  Press HOME MENU to display the Home Menu, select Initial Setup  Setup Navigator  Start, then press ENTER. 3 Select the OSD language. Use / to select, then press ENTER. TOP MENU TOOLS 4 Select and set the video and audio output terminals. Select the actually connected video and audio output terminals. Use to select, then press ENTER. TOP MENU TOOLS HOME MENU ENTER RETURN Setup Navigator BD PLAYER Select the output terminals to be used for the video and audio signals of this player. Video Audio Use [ ][ press [ ][ HDMI HDMI ] to select video or audio, then ] to select the output terminal. • When HDMI is selected for Video or Audio, proceed to step 5. • When Component Video is selected for Video, proceed to step 6. • When S-Video/Video is selected for Video, proceed to step 7. Setting item Output terminal name Video HDMI HDMI Output Component Video Video Output Component Video S-Video/Video S-Video Video Audio HDMI HDMI Output Digital Audio Digital Audio Output Coaxial Optical Analog Audio Audio Output (2ch) Audio Output (7.1ch) HOME MENU ENTER RETURN Setup Navigator BD PLAYER Please select the on-screen display language. Audio, subtitle and BDMV/DVD-Video menu language will also be set. When you have this player connected to a Pioneer Flat Panel TV that is compatible with HDMI Control, language settings are imported 20 from the Pioneer Flat Panel TV's language settings before Setup Navigator begins. En Caution • When HDMI is selected for Video, no video signals are output from the COMPONENT VIDEO, S-VIDEO or VIDEO output terminals. • When Component Video or S-Video/Video is selected for Video, no video signals are output from the HDMI OUT terminal. • The video and audio signals output from the set output terminals are output synchronously (lip synchronization). • When S-Video/Video or Component Video is selected at Video, no sound is output if HDMI is selected at Audio (the warning message shown below is displayed). Follow the procedure below to redo the connections, then select the proper connection at the setup screen.