Pioneer BDP51FD Owner's Manual - Page 37

Chapter 5 05 Adjusting audio and video Adjusting the video 2 Select the item to be adjusted. Use / to select. The quality of the playback picture can be adjusted according to the TV you are using. 1 During playback, press VIDEO ADJUST to display the Video Adjust screen. RED GREEN BLUE YELLOW VIDEO ADJUST Video Adjust [ Memory1 ] Prog. Motion Motion Still Pure Cinema Auto1 YNR Off Max CNR Off Max BNR Off Max MNR Off Max 1/2 Page Use [ ][ ] to adjust the picture to progressive scan. The Video Adjust screen can also be displayed by selecting Video Adjust from the TOOLS menu. 2 Select a preset. TOP MENU TOOLS HOME MENU ENTER RETURN Select using / according to the TV being used. Video Adjust PDP Adjustments • LCD - Select this when connected to a liquid crystal display TV. • PDP - Select this when connected to a plasma TV of another brand. • Pioneer PDP - Select this when connected to a Pioneer plasma TV. • Projector - Select this when connected to a front projector. • Professional - With this setting, video signal processing is restrained. Select this when connected to a professional monitor. • Memory1 to 3 - Picture quality settings with adjusted parameters can be stored in the memory. For a description of the parameters, see When Memory1, 2 or 3 is selected below.  When Memory1, 2 or 3 is selected 1 Select Adjustments. Use  to select Adjustments, then press ENTER. A detailed settings screen appears. 3 Adjust the picture quality. When / are pressed, the adjustments can be made watching the picture. The detailed settings screen reappears when ENTER is pressed. Prog. Motion Motion Still • Prog.Motion - Adjust according to the type of image (movie or still image). This is effective when outputting video materials as progressive images. • Pure Cinema - This setting optimizes the operation of the progressive scanning circuit for playing film materials. Normally set it to Auto1. If the picture seems unnatural, switch this to Auto 2, On or Off (page 38). • YNR - Reduces noise in the luminance (Y) signal. • CNR - Reduces noise in the chroma (C) signal. • BNR - Reduces the block noise (block-shaped distortion generated upon MPEG compression). • MNR - Reduces the mosquito noise (distortion along the contours of the picture generated upon MPEG compression). • Detail - Emphasizes the picture's contours. • White Level - Adjusts the level of the white portions. • Black Level - Adjusts the level of the black portions. • Black Setup - Select the black level as the setup level. Normally select 7.5 IRE. If the black level is too bright due to the combination with the connected monitor, select 0 IRE. • Gamma Correction - Adjusts how the dark portions of the picture look. • Hue - Adjusts the balance between green and red. • Chroma Level - Adjusts the density of the colors. Note • Prog.Motion and Pure Cinema have the effect only for pictures recorded in the interlaced scan format (480i or 1080i signals). • Prog.Motion is disabled when Pure Cinema is set to On. • Black Setup have the effect only for pictures output from the VIDEO and S-VIDEO output terminals. • YNR, CNR, BNR and MNR are disabled when 1080/24p signals are output from the HDMI OUT terminal. 37 En