Pioneer C-72 Operating Instructions - Page 17
Returning
View all Pioneer C-72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
QuestionS and Answers about the Learning Function Q: The remote control unit of my VCR has two REC (recording) buttons. They both have to be pressed at the same time to start recording. What is the learning procedure in this case? A: Hold one of the buttons on the programmable remote control depressed (for example the VCR • button) until the LEARN indicator lights up, and then press the two buttons on the VCR remote control simultaneously. Q: The remote control unit of my VCR has a REC (recording) button and a PLAY (playback) button and they both have to be pressed at the same time to start recording. What is the learning procedure in this case? A: Hold one of the buttons on the programmable remote control depressed (for example the VCR • button) until the LEARN indicator lights up, and then press the REC and PLAY buttons on the VCR remote control simultaneously. • As described above, operations which require two buttons to be pressed at the same time are programmed by pressing the two buttons simultaneously. Operating other equipment using the programmable remote control unit 1. Set the LEARN switch of the programmable remote control unit to the USE position. 2. Set the TRANSMIT mode selector switch to the desired position (AUDIO/VIDEO/AUX). • Set to the VIDEO position for programming as described in the example. 3. Press the button of the desired function. • The TRANSMIT indicator lights up while the remote control unit is sending codes. NOTE: • When operatingprogrammedbuttons, always set the LEARNselector switch to the USEposition. Operation is not possible in the LEARN position. • For functions which require two buttons to be pressed at the same time (recording etc.) or functions for which several codes are sent simultaneously (auto functions, timer programming, etc.) the programming procedure is different and improper operation may occur. HOW TO USE THE PROGRAMMABLE (LEARNING) REMOTE CONTROL UNIT Returning to the Initial Settings 1. Set the LEARN selector switch to the LEARN position. 2. Remove the battery cover. Cover OPEN o 3. Press any of the buttons available for programming. The LEARN indicator will illuminate. 4. Use a ball-point pen or similar object to press the RESET button while the LEARN indicator is flashing. Reset button • The programmed functions for the AUDIO, VIDEO and AUX positions are cleared, and the remote control unit is reset to the Pioneer uniform remote control codes. • Press the button gently; do not use excessive force. 17