Pioneer DEH-1200MP Owner's Manual - Page 8

Section 02 Operating this unit FF/REV (fast forward/reverse) You can switch the search method between fast forward/reverse and searching every 10 tracks. Selecting ROUGH enables you to search every 10 tracks. 1 Press d to select ROUGH. FF/REV - Fast forward and reverse ROUGH - Searching every 10 tracks To select FF/REV, press c. 2 Press BAND/ESC to return to the playback display. 3 Press and hold c or d to search every 10 tracks on a disc (folder). If the rest of track number is less than 10, press and hold c or d recalls the first (last) one. Audio Adjustments Audio Adjustments % Press A (audio) to select the audio function. After selecting, perform the following procedures to set the audio function. FAD (fader/balance adjustment) You can change the fader/balance setting. 1 Press a or b to adjust front/rear speaker balance. Adjustment range (front/rear): FAD F15 to FAD R15 FAD 0 is the proper setting when only two speakers are used. 2 Press c or d to adjust left/right speaker balance. Adjustment range (left/right): BAL L15 to BAL R15 BASS/MID/TREBLE (equalizer adjustment) You can adjust the bass/mid/treble level. ! Adjusted equalizer curve settings are stored in CUSTOM. 1 Press a or b to adjust the level. Adjustment range: +6 to -6 LOUD (loudness) Loudness compensates for deficiencies in the lowand high-frequency ranges at low volume. 1 Press a or b to turn loudness on or off. 2 Press c or d to select the desired setting. LOW (low)-HI (high) SLA (source level adjustment) SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM volume level, which remains unchanged. Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust. ! The AM volume level can also be adjusted with source level adjustments. 1 Press a or b to adjust the source volume. Adjustment range: SLA +4 to SLA -4 Note You can also turn loudness on or off by pressing and holding EQ/LOUD. Using the equalizer % Press EQ/LOUD to select the equalizer. DYNAMIC-VOCAL-NATURAL-CUSTOM -FLAT-POWERFUL ! CUSTOM allows you to create a customized setting. ! When FLAT is selected no adjustments are made to the sound. Other Functions Adjusting initial settings 1 Press SRC/OFF and hold until the unit turns off. 2 Press SRC/OFF and hold until the clock appears in the display. 3 Press F (function) to select the initial setting. After selecting, perform the following procedures to set the initial setting. Setting the clock 1 Press c or d to select the segment of the clock display you wish to set. Hour-Minute 2 Press a or b to put a clock right. 8 En