Pioneer DEH-3300UB Owner's Manual - Page 4
Use and care of the remote, control, Menu operations identical, for function settings/audio, - installation
UPC - 884938116084
View all Pioneer DEH-3300UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Section 02 Operating this unit Turning the unit off 1 Press S (SRC/OFF) and hold until the unit turns off. Selecting a source 1 Press S (SRC/OFF) to cycle between: TUNER (tuner)-CD (built-in CD player)-USB (USB)/iPod (iPod)-AUX (AUX) Adjusting the volume 1 Turn M.C. to adjust volume. CAUTION For safety reasons, park your vehicle when removing the front panel. Note When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the source off. Use and care of the remote control Using the remote control 1 Point the remote control in the direction of the front panel to operate. When using for the first time, pull out the film protruding from the tray. Replacing the battery 1 Slide the tray out on the back of the remote control. 2 Insert the battery with the plus (+) and minus (-) poles aligned properly. WARNING ! Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately. ! Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION ! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic objects. ! If the battery leaks, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, comply with governmental regulations or environmental public institutions' rules that apply in your country/area. ! "Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate. (Applicable to California, U.S.A.)" Important ! Do not store the remote control in high tem- peratures or direct sunlight. ! The remote control may not function properly in direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. Menu operations identical for function settings/audio adjustments/initial settings/lists Returning to the previous display Returning to the previous list (the folder one level higher) 1 Press . Returning to the main menu Returning to the top tier of list 1 Press and hold . 6 En Operating this unit Section 02 English Returning to the ordinary display Canceling the initial setting menu 1 Press B (BAND/ESC). Returning to the ordinary display from the list 1 Press B (BAND/ESC). Tuner Basic Operations Selecting a band 1 Press B (BAND/ESC) until the desired band (F1, F2, F3 for FM or AM) is displayed. Manual tuning (step by step) 1 Press c or d. Seeking 1 Press and hold c or d, and then release. You can cancel seek tuning by briefly pressing c or d. While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d. Storing and recalling stations for each band Using preset tuning buttons 1 When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing. 2 Press one of the preset tuning buttons (1 to 6) to select the desired station. # You can also recall stored radio stations by pressing a or b during the frequency display. Switching the display Selecting the desired text information 1 Press . Program service name-song title-artist name Scrolling the song title/artist name information to the left 1 Press and hold . Note Depending on the area, you cannot switch the display. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. To cancel, press M.C. again. LOCAL (local seek tuning) Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. FM: OFF-LEVEL 1-LEVEL 2-LEVEL 3-LEVEL 4 AM: OFF-LEVEL 1-LEVEL 2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. 3 Press M.C. to confirm the selection. En 7