Pioneer DEH-P3100UB Owner's Manual - Page 22

Section 03 Audio Adjustments Introduction of audio adjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to select. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functions in the following order. FADER/BALANCE (balance adjustment)- PRESET EQUALIZER (equalizer recall)- EQ SETTING 1 (equalizer adjustment)- EQ SETTING 2 (equalizer fine adjustment)- LOUDNESS (loudness)-SW SETTING 1 (subwoofer on/off setting)-SW SETTING 2 (subwoofer setting)-HIGH PASS FILTER (high pass filter)-BASS BOOST (bass boost)- SRC LV ADJUST (source level adjustment) 4 Press MULTI-CONTROL to display the setting mode of each function. # Push MULTI-CONTROL left to display the function selection menu. # Push and hold MULTI-CONTROL left to display the main menu. 5 Adjust the each function. Notes ! To return to the previous display, press DISP/BACK/SCRL. ! To return to the main menu, press and hold DISP/BACK/SCRL. ! To return to the ordinary display, press BAND/ESC. ! When the subwoofer controller setting is PREOUT:REAR, you cannot switch to SW SETTING 1 (subwoofer on/off setting). (Refer to page 26.) ! You can select the SW SETTING 2 only when subwoofer output is turned on in SW SETTING 1. ! When selecting FM as the source, you cannot switch to SRC LV ADJUST. ! If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. Using balance adjustment You can change the fader/balance setting so that it can provide the ideal listening environment in all occupied seats. 1 Use MULTI-CONTROL to select FADER/BALANCE in the audio function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment you wish to set. Press MULTI-CONTROL repeatedly to switch between fader and balance. 4 Turn MULTI-CONTROL to adjust speaker balance. Front/rear speaker balance can be adjusted between FAD F15 and FAD R15. Left/right speaker balance can be adjusted between BAL L15 and BAL R15. # You can also perform the same operations by pushing MULTI-CONTROL up or down. # FAD 0 is the proper setting when only two speakers are used. # When the rear output setting is REAR SP :SUB W, adjusting the front/rear speaker balance is not effective. Refer to Setting the rear output and subwoofer controller on page 26. Using the equalizer The equalizer lets you adjust the equalization to match the car's interior acoustic characteristics as desired. 22 En