Pioneer DEH-P3100UB Owner's Manual - Page 33

Available accessories Section 06 English Bluetooth Telephone If you use a Bluetooth adapter (e.g. CDBTB200), you can connect a cellular phone featuring Bluetooth wireless technology to this unit for hands-free, wireless calls, even while driving. ! In some countries, CD-BTB200 is not sold on the market. Basic Operations Important ! Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage. ! Advanced operations that require your attention such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place. Notes ! The equalizer curve for the phone source is fixed. ! When selecting the phone source, you can only operate FADER/BALANCE (balance adjustment) in the audio menu. Setting up for hands-free phoning Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level. 1 Connection For detailed instructions on connecting your phone to this unit via Bluetooth wireless technology, refer to Connecting a cellular phone on page 35. # Your phone should now be temporarily connected. However, to make best use of the technology, we recommend you register the phone to this unit. 2 Registration To register your temporarily connected phone, refer to Registering a connected cellular phone on page 36. 3 Volume adjustment Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is recorded in this unit as the default setting. # Caller's voice volume and ring volume may vary depending on the type of cellular phone. # If the difference between the ring volume and caller's voice volume is big, overall volume level may become unstable. # Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected. Making a phone call Voice recognition 1 Press BAND/ESC and hold until VOICE DIAL appears in the display. When VOICE DIAL ON is displayed, voice recognition function is now ready. # If your cellular phone does not feature voice recognition function, NO VOICE DIAL appears in the display and operation is not possible. 2 Pronounce the name of your contact. Taking a phone call Answering or rejecting an incoming call % Answering an incoming call When a call comes in, press MULTI-CONTROL. En 33