Pioneer DEH-P3100UB Owner's Manual - Page 35
Connecting a cellular phone, Disconnecting a cellular phone
UPC - 012562943497
View all Pioneer DEH-P3100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Available accessories Section 06 English Notes ! To return to the previous display, press DISP/BACK/SCRL. ! To return to the main menu, press and hold DISP/BACK/SCRL. ! To return to the playback display, press BAND/ESC. ! DEVICE INFO is the same as that of the Bluetooth audio. (Refer to Displaying BD (Bluetooth Device) address on page 32.) ! If a cellular phone is connected to this unit via Bluetooth wireless technology with HSP (Head Set Profile), CLEAR MEMORY, NUMBER DIAL and REFUSE CALLS cannot be selected. ! If you do not operate functions other than SEARCH PHONE, CONNECTION OPEN, CONNECT PHONE, PH BOOK TRANSFER, DISCONNECT PHONE, NUMBER DIAL and CLEAR MEMORY within about 30 seconds, the display automatically returns to the ordinary display. Connecting a cellular phone Searching for available cellular phones 1 Use MULTI-CONTROL to select SEARCH PHONE in the function menu. 2 Press MULTI-CONTROL to search for available cellular phones. While searching, SEARCHING flashes. When available cellular phones featuring Bluetooth wireless technology are found, device name or NAME NOT FOUND (if names cannot be obtained) is displayed. # If this unit fails to find any available cellular phones, NOT FOUND is displayed. 3 Turn MULTI-CONTROL to select a device name you want to connect. # You can also perform the same operations by pushing MULTI-CONTROL up or down. 4 Press MULTI-CONTROL to connect the selected cellular phone. While connecting, CONNECTING flashes. To complete the connection, check the device name (PIONEER BT UNIT) and enter the link code on your cellular phone. If the connection is established, CONNECTED is displayed. # PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless connection on page 27. Using a cellular phone to initiate a connection 1 Use MULTI-CONTROL to select CONNECTION OPEN in the function menu. 2 Press MULTI-CONTROL to open the connection. ALWAYS WAITING flashes and the unit is now on standby for connection from a cellular phone. 3 Use cellular phone to connect to this unit. To complete the connection, check the device name (PIONEER BT UNIT) and enter the link code on your cellular phone. If the connection is established, CONNECTED is displayed. # PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless connection on page 27. # If the connection fails, ERROR is displayed. In this case, try again from the beginning. Disconnecting a cellular phone 1 Use MULTI-CONTROL to select DISCONNECT PHONE in the function menu. Device name of the connected phone appears in the display. 2 Press MULTI-CONTROL to disconnect a cellular phone from this unit. After disconnection is completed, DISCONNECTED is displayed. En 35