Pioneer DEH-P3700MP Owner's Manual - Page 34
Adjusting initial settings, Setting the clock, Switching the auxiliary setting, Initial Settings
UPC - 012562717852
View all Pioneer DEH-P3700MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Section 09 Initial Settings Adjusting initial settings As you select segments of the clock display the segment selected will blink. 1 Initial settings lets you perform initial setup of different settings for this unit. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press FUNCTION and hold until the clock appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: ClockAUX (auxiliary input) Use the following instructions to operate each particular setting. # To cancel initial settings, press BAND. # You can also cancel initial settings by holding down FUNCTION until the unit turns off. 3 Press a or b to set the clock. Pressing a will increase the selected hour or minute. Pressing b will decrease the selected hour or minute. Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1 Press FUNCTION to select AUX. Press FUNCTION repeatedly until AUX appears in the display. 2 Press a or b to turn AUX on or off. Pressing a or b will turn AUX on or off and that status will be displayed (e.g., AUX ON). Setting the clock Use these instructions to set the clock. 1 Press FUNCTION to select clock. Press FUNCTION repeatedly until clock appears in the display. 2 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute 34 En