Pioneer DEH-P4900IB Owner's Manual - Page 18
Using balance adjustment, Using the equalizer, Recalling equalizer curves - car audio
UPC - 012562845791
View all Pioneer DEH-P4900IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 02 Operating this unit # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats. 1 Press AUDIO to select FADER. # If the balance setting has been previously adjusted, BALANCE will be displayed. 2 Press a or b to adjust front/rear speaker balance. FADER FRONT 15 to FADER REAR 15 is displayed as the front/rear speaker balance moves from front to rear. # FADER 0 is the proper setting when only two speakers are used. # When the rear output setting is REAR SP S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 22. 3 Press c or d to adjust left/right speaker balance. BALANCE LEFT 15 to BALANCE RIGHT 15 is displayed as the left/right speaker balance moves from left to right. Using the equalizer The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves: Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom FLAT Flat SUPERBASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting will be memorized in CUSTOM. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: POWERFUL-NATURAL-VOCAL-CUSTOM -FLAT-SUPERBASS Adjusting equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select EQ. 2 Press c or d to select the equalizer band to adjust. EQ-LOW (low)-EQ-MID (mid)-EQ-HIGH (high) 3 Press a or b to adjust the level of the equalizer band. +6 to -6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. Note If you make adjustments, CUSTOM curve is updated. 18 En