Pioneer DEH-P5100UB Owner's Manual - Page 11

Operating this unit Section 02 English Basic Operations Power ON/OFF Turning the unit on % Press SRC/OFF to turn the unit on. Turning the unit off % Press SRC/OFF and hold until the unit turns off. Selecting a source You can select a source you want to listen to. % Press SRC/OFF repeatedly to switch between the following sources. XM (XM tuner)-SIRIUS (SIRIUS tuner)- HD Radio (HD Radio tuner)-Tuner (tuner)- DVD (DVD player/multi-DVD player)-CD (built-in CD player)-Multi CD (multi-CD player)-iPod (iPod connected with the interface adapter)-USB1 (USB storage device 1)/ iPod1 (iPod 1 connected using USB input)- USB2 (USB storage device 2)/iPod2 (iPod 2 connected using USB input)-EXT (external unit 1)-EXT (external unit 2)-AUX1 (AUX1) -AUX2 (AUX2)-BT Audio (BT audio)-TEL (BT telephone) Notes ! In the following cases, the sound source will not change. - When no unit corresponding to the selected source is connected. - When there is no disc or magazine in the player. - When the iPod is not connected to this unit with the interface adapter. - When AUX (auxiliary input) is set to off (refer to page 29). - When the BT Audio source is set to off (refer to Activating the BT Audio source on page 31). ! USB1/iPod1 and USB2/iPod2 are the same operations. However, sources are different de- pending on the terminal which has been connected to. ! USB storage device or iPod connected to the USB port 1 on the front panel is USB1/iPod1 source. Regarding the position of USB port 1, refer to Head unit on page 9. ! USB storage device or iPod connected to the USB port 2 on the rear panel is USB2/iPod2 source. Regarding the position of USB port 2, refer to installation manual. ! If the HD Radio tuner is connected to this unit, tuner source is skipped. ! When an USB storage device or iPod is not connected to the USB port of this unit, NO DEVICE is displayed. ! AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxiliary setting on page 29). ! Charging the portable audio player using car's DC power source while connecting it to AUX input may generate noise. In this case, stop charging. ! External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit. ! When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the source off. Adjusting the volume % Turn MULTI-CONTROL to adjust the sound level. En 11