Pioneer DEH-P5100UB Owner's Manual - Page 48

Section 06 Available accessories 2 Press MULTI-CONTROL to turn echo canceling on. # To turn echo canceling off, press MULTI-CONTROL again. XM tuner Listening to XM Satellite Radio You can use this unit to control an XM satellite digital tuner (GEX-P920XM), which is sold separately. For details concerning operation, refer to the XM tuner's operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner's operation manual. ! With this unit, you can operate two addi- tional functions: XM channel direct selection and preset channel list. 1 XM band indicator 2 XM channel number indicator 3 XM preset number indicator 4 XM channel select setting indicator Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CAT is displayed when Category is selected. 5 XM text information Shows the text information of broadcast channel. % Select an XM band. Press BAND/ESC. # Band can be selected from XM-1, XM-2 or XM-3. % Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.) Switching the XM display % Press DISP/SCRL to switch the XM display. Storing and recalling broadcast stations You can easily store up to six broadcast stations for later recall. ! Six stations for each band can be stored in memory. 1 Press /LIST. Preset screen is displayed. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number. Press and hold to store. The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display. 48 En