Pioneer DEH-P6000 Owner's Manual - Page 28
Boosting the bass, Using the high pass filter, Adjusting source levels, Audio Adjustments
![]() |
View all Pioneer DEH-P6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Section 03 Audio Adjustments 4 Push MULTI-CONTROL up or down to adjust the output level of the subwoofer. Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to -24 is displayed as the level is increased or decreased. 4 Push MULTI-CONTROL left or right to select cut-off frequency. Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50Hz-63Hz-80Hz-100Hz-125Hz Boosting the bass Bass boost function boosts the bass level of sound. 1 Display the audio menu. Refer to Introduction of audio adjustments on page 25. # You can also select the bass boost setting by pressing and holding SW. 2 Use MULTI-CONTROL to select Bass. 3 Push MULTI-CONTROL up or down to select a desired level. 0 to +6 is displayed as the level is increased or decreased. Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Display the audio menu. Refer to Introduction of audio adjustments on page 25. 2 Use MULTI-CONTROL to select HPF. 3 Press MULTI-CONTROL to turn high pass filter on. 80Hz appears in the display. High pass filter is now on. # If the high pass filter has been previously adjusted, the frequency of that previously selected will be displayed instead of 80Hz. # To turn high pass filter off, press MULTI-CONTROL again. Adjusting source levels Source level adjustment (SLA) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Compare the FM volume level with the level of the source you wish to adjust. 2 Display the audio menu. Refer to Introduction of audio adjustments on page 25. 3 Use MULTI-CONTROL to select SLA. 4 Push MULTI-CONTROL up or down to adjust the source volume. Each time MULTI-CONTROL is pushed up or down, source volume increases or decreases. SLA +4 to SLA -4 is displayed as the source volume is increased or decreased. Notes ! The AM volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. ! XM tuner and SIRIUS tuner are set to the same source level adjustment volume automatically. 28 En
![](/manual_guide/products/pioneer-dehp6000ub-owners-manual-945296c/28.png)