Pioneer DEH-P6400 Operation Manual - Page 13
Tuner
View all Pioneer DEH-P6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Tuner Section 03 English Español Deutsch Listening to the radio 1 23 4 These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on page 14. 1 STEREO (ST) indicator Shows that the frequency selected is being broadcast in stereo. 2 BAND indicator Shows which band the radio is tuned to, AM or FM. 3 PRESET NUMBER indicator Shows what preset has been selected. 4 FREQUENCY indicator Shows to which frequency the tuner is tuned. 1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed. 2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Press BAND/ESC to select a band. Press BAND/ESC until the desired band is displayed, FM1, FM2, FM3 for FM or AM. 4 To perform manual tuning, press 2 or 3 with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold 2 or 3 for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. • You can cancel seek tuning by pressing either 2 or 3 with a quick press. • If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note • When the frequency selected is being broadcast in stereo the STEREO (ST ) indicator will light. Français Italiano Nederlands En 13