Pioneer DEH-P6400 Operation Manual - Page 32
Initial Settings - aux
View all Pioneer DEH-P6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 07 Initial Settings Adjusting initial settings 1 Initial settings lets you perform initial set up of different settings for this unit. 1 FUNCTION display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press FUNCTION and hold until time appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: CLOCK-WARN-AUX-DIM-BRIGHT-SW- TEL Use the following instructions to operate each particular setting. • To cancel initial settings, press BAND/ESC. • You can also cancel initial settings by holding down FUNCTION until the unit turns off. Setting the time This is used to set the time on the unit's clock display. 1 Press FUNCTION to select the CLOCK. Press FUNCTION until the time appears in the display. 2 Select the portion of the time display you wish to set with 2/3. Pressing 2/3 will select a portion of the clock display: HOUR-MINUTE As you select portions of the clock display the portion selected will blink. 3 Select the correct time with 5/∞. Pressing 5 will increase the selected hour or minute. Pressing ∞ will decrease the selected hour or minute. Switching the warning tone If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off this warning tone. 1 Press FUNCTION to select WARN. Press FUNCTION repeatedly until Warning appears in the display. 2 Select WARN on or off with 5/∞. Pressing 5/∞ will switch Warning between on and off and that status will be displayed (e.g., Warning :ON). 32 En