Pioneer DEH-P6500 Owner's Manual - Page 8
About the demo mode, Before You Start, Attaching the front panel, Reverse mode, Feature demo - clipping
View all Pioneer DEH-P6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section HHHHHHHHHHHHHH 01 Before You Start Attaching the front panel % Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks. Feature demo The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Pressing 6 numbered button during feature demo operation cancels the feature demo mode. Pressing 6 numbered button again to start the feature mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. About the demo mode This unit features two demonstration modes. One is the reverse mode, the other is the feature demo mode. ! You cannot cancel a demo mode when the front panel is open. Important The red lead (ACC) of this unit should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained. About the operation mode This unit features two operation modes, operation mode 1 and 2. Operation mode 1 enables you to operate all the functions of this unit. Operation mode 2 enables you to operate the basic functions for each source easily. This manual explains operation mode 1. Please refer to Using the operation mode 2 on page 35 for operation mode 2. Reverse mode If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing 5 numbered button when power to this unit is turned off while the ignition switch is set to ACC or ON cancels the reverse mode. Pressing 5 numbered button again to start the reverse mode. 8 En