Pioneer DEH-P9400MP Owner's Manual - Page 11

ENGLISH ESPAÑOL DEUTSCH Using the steering remote con- troller Precaution: • Do not operate this unit while manipulating the steering wheel as this might result in a traffic accident. • If you have to operate this unit unavoidably when driving, pay careful attention to the road ahead to avoid the risk of being involved in a traffic accident. • If any of the following problems occur, immediately stop using this unit and consult with the dealer from whom you purchased it: - the unit is smoking. - the unit is emitting an abnormal odor. - a foreign object has entered the unit. - liquid has been spilled on or into the unit. If you continue to use this unit without rectifying the problem, the unit may be damaged badly, resulting in a serious accident or fire. • Do not leave this unit free (unattached) inside the car. When the car stops or turns a curve, the unit might drop on the floor. If the unit rolls under the brake pedal, it might prevent the driver from braking properly, causing serious trouble. Be sure to fix this unit to the steering wheel. • Do not disassemble or modify this unit. To do so may cause a malfunction. • If you press the FUNCTION button on the remote controller while pressing the BAND button on it, the remote controller will not function properly. To cancel this setting, press the AUDIO button on the remote controller while pressing the BAND button on it to return to the previous setting. FUNCTION button and AUDIO button Operation of the FUNCTION button and the AUDIO button on the remote controller differs from the operation of the FUNC button and the AUDIO button on the head unit. When operating the head unit, use the FUNC button and the AUDIO button to select the appropriate menu, then use the multi-function buttons to select the mode. When operating the remote controller, however, switch through the modes as described below to select the mode. FUNCTION button operation • Press FUNCTION to select the desired mode (e.g., built-in CD player). Press FUNCTION repeatedly to switch between the following modes: RPT = RDM = SCAN = T.LIST = PAUSE = TTLin Note: • Refer to "Built-in CD player function menu" on page 18. AUDIO button operation • Press AUDIO to select the desired mode. Press AUDIO repeatedly to switch between the following modes: BAL = NW = POSI = T.AL = EQ1 = EQ2 = EFFECT = LOUD = ASL = SLA = D.ATT F/B = LOUD = SFC = EQ1 = EQ2 = ASL = POSI = T.AL1 = T.AL2 = SW1 = SW2 = HPF F = HPF R = SLA = A.EQ = D.ATT Note: • Refer to "Audio menu" on page 40. FRANÇAIS ITALIANO NEDERLANDS 10