Pioneer DEH-X5800HD Owner's Manual - Page 11
AUDIO settings
![]() |
View all Pioneer DEH-X5800HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Menu Item Description HD SEEK* [ON], [OFF] Change seek tuning setting between digital station seek ([ON]) and all station seek ([OFF]) depending on the reception status. BLEND* [ON], [OFF] Set [ON] to switch to the analog broadcast of the same frequency level automatically if a digital broadcast reception is poor. Set [OFF] to receive analog broadcast only. ACTIVE RADIO [ON], [OFF] Interrupt the currently selected source with emergency announcements or test messages. A beep can be heard when an emergency announcement or test message breaks in. Select [OFF] to disable this function. (In some cases when a test message is received, a notification will appear in the display instead of a beep.) S.RTRV USB iPod [1] (effective for low compression rates), [2] (effective for high compression rates), [OFF] Enhance compressed audio and restore rich sound. Not available when: • USB is selected as a source and the MIXTRAX function is set to on. • CD-DA/CD-TEXT is played back. AUDIO BOOK iPod [FASTER], [NORMAL], [SLOWER] Change the playback speed. (Not available when [CONTROL iPod] is selected in the control mode.) BOOKMARK Store the track information currently being played in your Pandora account. NEW STATION [FROM TRACK], [FROM ARTIST] Create a new station based on the track or artist currently being played. PAUSE Pause or resume playback. * If [HD SEEK] is set to [ON] and [BLEND] is set to [OFF], the tuner cannot receive broadcasts. In this case, [HD SEEK] or [BLEND] is changed automatically as follows: - When [HD SEEK] is set to [ON], if you switch [BLEND] from [ON] to [OFF], [HD SEEK] is changed to [OFF]. - When [BLEND] is set to [OFF], if you switch [HD SEEK] from [OFF] to [ON], [BLEND] is changed to [ON]. AUDIO settings Menu Item Description FADER*1 Adjust the front and rear speaker balance. BALANCE Adjust the left and right speaker balance. EQ SETTING [SUPER BASS], [POWERFUL], [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM2], [FLAT] Select an equalizer band and level for further customizing. Equalizer band: [80HZ], [250HZ], [800HZ], [2.5KHZ], [8KHZ] Equalizer level: [+6] to [-6] Select or customize the equalizer curve. [CUSTOM1] can be set separately for each source. However, each of the below combinations are set to the same setting automatically. • USB, iPod, PANDORA (iPhone), ANDROID, and APP (iPhone) [CUSTOM2] is a shared setting used for all sources. LOUDNESS [OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume. SUB.W*2 [NOR], [REV], [OFF] Select the subwoofer phase. SUB.W CTRL*2*3 Cut-off frequency: [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ] Output level: [-24] to [+6] Slope level: [-12], [-24] BASS BOOST [0] to [+6] Only frequencies lower than those in the selected range are output from the subwoofer. Select the bass boost level. HPF SETTING Cut-off frequency: [OFF], [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ] Slope level: [-12], [-24] Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers. En 11 English
![](/manual_guide/products/pioneer-dehx5800hd-owners-manual-a36d99e/11.png)