Pioneer DEH-X6800BT Owner's Manual - Page 10

TIP When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call. Basic operations Purpose End a call Reject an incoming call Switch between the current caller and a caller on hold Cancel a caller on hold Adjust the volume of the caller's voice (When private mode is on, this function is not available.) Turn the privacy mode on or off Operation Press . Press and hold when a call is received. Press the M.C. dial. Press and hold . Turn the M.C. dial during the call. Press BAND/ or BAND/ during the call. To preset phone numbers 1 Select a phone number from a phone book or call history. 2 Press and hold one of the number buttons (1/ to 6/ ). The contact is stored in the selected preset number. To make a call using a preset number, press one of the number buttons (1/ to 6/ ), then press the M.C. dial. Voice recognition (Only for iPhone) This function is only available when an iPhone equipped with voice recognition is connected to the unit via Bluetooth. 1 Press and hold to activate the voice recognition mode. 2 Press the M.C. dial and then talk into the microphone to input voice commands. To exit the voice recognition mode, press BAND/ or BAND/ . NOTE For details on the voice recognition features, refer to the manual supplied with your iPhone. 10 En Phone menu Menu Item RECENTS [MISSED] [DIALED] [RECEIVED] PHONE BOOK*1 PRESET 1-6 A.ANSR*2 [ON], [OFF] R.TONE [ON], [OFF] PB INVT PB A.SYNC [ON], [OFF] BT SETTING Description Display the missed call history. Display the dialed call history. Display the received call history. Display the contacts which have been transferred from your phone. Set [VISIBLE] in the Bluetooth settings to [ON] to browse the contacts via this unit. Recall the preset phone numbers. You can also recall the preset phone numbers by pressing one of the number buttons (1/ to 6/ ). Select [ON] to answer an incoming call automatically. Select [ON] if the ring tone does not come out from the car speakers. Depending on the connected phone, this function may not work. Invert the order of names in the phone book (name view). Select whether or not to transfer the contacts from your phone automatically when your phone is connected to the unit. • When connected for the first time, the contacts from your phone are transferred automatically, regardless of the [PB A.SYNC] setting. • If you switch from [ON] to [OFF], the auto synchronization will be performed on the next connection. • During the auto synchronization, you cannot cancel the synchronization, even if you select [OFF]. You can adjust various settings for Bluetooth connections. For details on Bluetooth settings, see page 9. *1 The contacts on your phone will normally be transferred automatically when the phone is connected. If they are not, use your phone to transfer the contacts. *2 If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call. Bluetooth audio Important • Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels: - A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.