Pioneer DMH-WT8600NEX Installation Manual - Page 8
Installation
View all Pioneer DMH-WT8600NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
passengers in the rear seats to watch the video source. 8 En Installation Precautions before installation CAUTION • Never install this product in places where, or in a manner that: - Could injure the driver or passengers if the vehicle stops suddenly. - May interfere with the driver's operation of the vehicle, such as on the floor in front of the driver's seat, or close to the steering wheel or shift lever. • To ensure proper installation, be sure to use the supplied parts in the manner specified. If any parts are not supplied with this product, use compatible parts in the manner specified after you have the part compatibility checked by your dealer. If parts other than supplied or compatible ones are used, they may damage internal parts of this product or they may work loose and the product may become detached. • It is extremely dangerous to allow cables to become wound around the steering column or shift lever. Be sure to install this product, its cables, and wiring away in such so that they will not obstruct or hinder driving. • Make sure that leads cannot get caught in a door or the sliding mechanism of a seat, resulting in a short circuit. • Please confirm the proper function of your vehicle's other equipment after installation of this product. • Do not install this product where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including airbags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. • Never install this product in front of or next to the place in the dashboard, door, or pillar from which one of your vehicle's airbags would deploy. Please refer to your vehicle's owner's manual for reference to the deployment area of the frontal airbags. Before installing • Consult with your nearest dealer if installation requires drilling holes or other modifications of the vehicle. • Before making a final installation of this product, temporarily connect the wiring to confirm that the connections are correct and the system works properly. Installation notes • Do not install this product in places subject to high temperatures or humidity, such as: - Places close to a heater, vent or air conditioner. - Places exposed to direct sunlight, such as on top of the dashboard. - Places that may be exposed to rain, such as close to the door or on the vehicle's floor. • Install this product horizontally on a surface within 0 to 30 degrees tolerance (within 5 degrees to the left or right). Improper installation of the unit with the surface tilted more than these tolerances increases the potential for errors in the