Pioneer DV-58AV Owner's Manual - Page 13

Connecting to an AV receiver To multi-channel audio inputs 02 You can connect this player to your AV receiver using the multichannel analog outputs or one of the digital outputs. In addition to these connections, you should also connect the 2 channel analog outputs for compatibility with all discs. You'll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection). 1 Connect the analog AUDIO OUT (2ch) and VIDEO OUT jacks on this player to a set of analog audio and video inputs on your AV receiver. AV receiver AV receiver To audio inputs To video inputs You can also use the S-Video or component video jacks to connect to the AV receiver if you prefer. 2 Connect the AV receiver's video output to a video input on your TV. You can also use the S-Video or component video jacks to connect to the AV receiver if you prefer. Tip • You usually have to connect the same kind of video cable between your DVD player and AV receiver, and between your AV receiver and TV. Connecting the multichannel analog outputs If your AV receiver has 5.1 channel analog inputs, we recommend connecting this player to it using the multichannel analog outputs. Doing this will ensure that you can enjoy all kinds of disc, including Dolby Digital and DTS DVD-Video discs, as well as high sampling rate and multichannel DVD-Audio and SACD discs. • Connect the multi-channel audio outputs on this player to the multi-channel audio inputs on your AV receiver. It's convenient to use three stereo audio cables; one for the FRONT, one for the SURROUND and one for the CENTER and SUBWOOFER channels. Tip • After connecting up and switching on, you should change the Audio Output Mode setting (page 36) in the Initial Setup menu from the default 2 Channel to 5.1 Channel. Connecting the digital output This player has both optical and coaxial-type digital audio outputs for connection to an AV receiver. Connect whichever is convenient. Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out settings on page 32 and refer to the operating instructions that came with your AV receiver. Note that SACD audio is not output through these jacks, so this connection should be in addition to, rather than instead of, a 5.1 channel analog connection. • Connect one of the DIGITAL AUDIO OUT (COAXIAL/ OPTICAL) jacks on this player to a digital input on your AV receiver. To coaxial/optical digital input AV receiver For an optical connection, use an optical cable (not supplied) to connect the DIGITAL AUDIO OUT OPTICAL jack to an optical input on your AV receiver. For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the DIGITAL AUDIO OUT COAXIAL jack to a coaxial input on your AV receiver. 13 En