Pioneer DVD-106S Operating Instructions - Page 10
Connection
View all Pioneer DVD-106S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CONNECTION Digital audio output Audio cable Pin 1 IDE interface cable Power cable 1. Turn off the power of the personal computer and remove the power cord from the AC outlet. 2. Connect the power supply cable from the personal computer. At the time of connection, please pay attention to the cable polarity. 1 DC INPUT 2 +5 G G +12 3. Connect the IDE interface cable. At this time, confirm that the pin 1 of the IDE connector is connected correctly to pin 1 of the cable. 4. When a sound board is used, connect the audio output with an audio cable to the sound board. WARNING Before connecting the cables, be sure to first turn off the power of the personal computer and remove the power cord from the AC outlet. WARNING Be sure to supply electrical power for this product from the personal computer which is connected to it. Do not use any other power supply than the internal one of the personal computer. WARNING If you insert the power cable reversed, the unit may be damaged. Be sure not to insert the cable reversed. 10 En