Pioneer DVD-106S Operating Instructions - Page 9
To Install The Drive - manual
View all Pioneer DVD-106S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TO INSTALL THE DRIVE PHONES DVD-ROM DRIVE BUSY 1. Turn off the power of the personal computer and remove the power cord from the AC outlet, then remove the cover or the front panel. 2. Remove the blank panel installed at the front of the 5.25 inch slot. Installation is not possible when there is no empty slot. 3. Install the fixation slide rails on the drive. (If slide rails are required, contact the shop where you bought the computer or the computer manufacturer.) 4. Insert the drive into the slot. ÷ If fixing is required, fix the drive according to the instruction manual for the computer. Use mounting screws with a length of 5 mm (3/16 in.) or less. Using longer screws may cause damage on the drive. Install the drive after you have turned off the power of the personal computer and removed the power cord from the AC outlet. When the mounting screws are loose etc., the vibrations from disc rotation may generate ripping noise, to prevent it the screws should be tightened securely. The drive installation method differs according to the computer type. For details, please refer to the manuals of your computer. 9 En