Pioneer FH-P5000MP Owner's Manual - Page 39
Introduction of audio, adjustments, Using balance adjustment, Adjusting loudness, Audio Adjustments
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Audio Adjustments Section 09 English Introduction of audio adjustments 1 Loud indicator Appears in the display when loudness is turned on. 2 SW indicator Shows when the subwoofer output is turned on. 3 Audio display Shows the audio adjustments status. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)Loud (loudness) SUB.W (subwoofer setting)80 (subwoofer cut-off frequency)SLOPE (subwoofer slope) Slope (front high pass filter slope)80 (front high pass filter cut-off frequency) Slope (rear high pass filter slope)80 (rear high pass filter cut-off frequency) # You can select the 80 (subwoofer cut-off frequency) and the SLOPE (subwoofer slope) only when subwoofer output is turned on in the SUB.W. # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Push Multi Control up or down to adjust front/rear speaker balance. Each pushing Multi Control up or down moves the front/rear speaker balance towards the front or the rear. FAD :F25 FAD :R25 is displayed as the front/ rear speaker balance moves from front to rear. # FAD : 0 is the proper setting when only two speakers are used. 3 Push Multi Control left or right to adjust left/right speaker balance. Each pushing Multi Control left or right moves the left/right speaker balance towards the left or the right. BAL :L25 BAL :R25 is displayed as the left/ right speaker balance moves from left to right. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select Loud. Press AUDIO until Loud appears in the display. 2 Push Multi Control up to turn loudness on. Loud :ON appears in the display. En 39