Pioneer FH-P5000MP Owner's Manual - Page 41
Using the high pass filter, Adjusting source levels, Audio Adjustments
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Audio Adjustments Section 09 English Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, use the HPF (high pass filter) . Only frequencies higher than those in the selected range are output from the front or rear speakers. You can set up front and rear separately. Adjusting high pass filter attenuation slope 1 Press AUDIO to select the slope setting. Press AUDIO until Slope (front high pass filter slope) or Slope (rear high pass filter slope) appears in the display. 2 Push Multi Control left or right to select slope. Each pushing Multi Control left or right selects slopes in the following order: 0612 (dB/oct.) # Push and hold Multi Control down to mute the selected speaker unit, when you adjust the other speaker unit. You can cancel the muting by pushing Multi Control up. Adjusting high pass filter setting 1 Press AUDIO to select 80. Press AUDIO until 80 (front high pass filter cut-off frequency) or 80 (rear high pass filter cut-off frequency) appears in the display. 2 Push Multi Control left or right to select Slope. Each pushing Multi Control left or right selects cut-off frequencies in the following order: 506380100125160200 (Hz) Only frequencies higher than those in the selected range are output from the front or rear speakers. 3 Push Multi Control up or down to adjust the output level of the speakers. Each pushing Multi Control up or down increases or decreases the level of the front or rear speakers. 0 24 is displayed as the level is increased or decreased. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO and hold until SLA appears in the display. # When selecting the FM tuner as the source, you cannot switch to SLA. 3 Push Multi Control up or down to adjust the source volume. Each pushing Multi Control up or down increases or decreases the source volume. SLA : +4 SLA : 4 is displayed as the source volume is increased or decreased. Notes ! If you do not operate the SLA function within about 30 seconds, the display is automatically returned to the source display. ! The AM tuner volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. En 41