Pioneer GM-D8400M Owner's Manual - Page 10

Connecting the Unit Connecting the Speaker Output Terminals • Use a 10 AWG to 16 AWG wire for the speaker wire. 1. Expose the end of the speaker wires using nippers or a cutter by about 10 mm to 12 mm (3/8 in.). 7 Connections when using the speaker input Car Stereo Speaker output 10 mm to 12 mm (3/8 in.) 2. Connect the speaker wires to the speaker output terminals. • Fix the speaker wires securely with the terminal screws. Terminal screws Speaker output terminal Speaker wire White: Black: Black: Red: Left + Left ≠ Right ≠ Right + Speaker input wire with RCA pin cord To RCA input jack of this unit. Using the Speaker Input Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire with RCA pin cord. • Slide the input switch to the left (SP). Connecting the Speaker Wires Connect the speaker leads according to the figures shown below. Subwoofer 9