Pioneer GM-D8400M Owner's Manual - Page 13

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Specifications Power source ...14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ...Negative type Current consumption ...27.0 A (at continuous power, 4 Ω) Average current drawn* ...7.5 A (4 Ω for one channel) 15.0 A (2 Ω for one channel) Fuse ...30 A × 2 Dimensions ...290 mm (W) × 56 mm (H) × 200 mm (D) [11-3/8 in. (W) × 2-1/4 in. (H) × 7-7/8 in. (D)] (Terminals not included) Weight ...3.2 kg (7.0 lbs) (Leads for wiring not included) Maximum power output 600 W × 1 (4 Ω) / 1 200 W × 1 (2 Ω) Continuous power (14.4 V 4 Ω, 20 Hz to 240 Hz, 1.0 % THD, 300 W × 1 2 Ω, 50 Hz, 1.0 % THD, 600 W × 1 Load impedance ...4 Ω (2 Ω to 8 Ω allowable) Frequency response ...10 Hz to 240 Hz (+0 dB, -3 dB) Signal-to-noise ratio ...80 dB (IHF-A network) Distortion ...0.3 % (10 W, 100 Hz) Low pass filter ...Cut off frequency: 40 Hz to 240 Hz Cut off slope: -12 dB/oct Bass Boost ...Frequency: 50 Hz Level: 0 dB to 12 dB Gain control ...RCA: 200 mV to 6.5 V Speaker: 0.8 V to 26 V Maximum input level / impedance ...RCA: 6.5 V / 22 kΩ Speaker: 26 V / 90 kΩ Power output 300 W RMS × 1 channel (4 Ω and 1 % THD+N) 600 W RMS × 1 channel (2 Ω and 1 % THD+N, 50 Hz) Signal-to-noise ratio 54 dBA (Reference: 1 W into 4 Ω) Note: • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. 12