Pioneer GM-X924 Service Manual - Page 33

8.2 SPECIFICATIONS - GM-X1024/X1R/UC Specifications - GM-X924/X1R/UC, GM-X924/X1R/EW, GM-X924/X1R/ES Specifications Power source ...14.4 V DC (10.8 - 15.1 V allowable) Grounding system ...Negative type Current consumption ...39 A (at continuous power, 4 Ω) Average current drawn* ...11 A (4 Ω for four channels) 18 A (4 Ω for two channels) Fuse ...30 A × 2 Dimensions ...255 (W) × 61 (H) × 310 (D) mm [10 (W) × 2-3/8 (H) × 12-1/4 (D) in.] Weight ...4.1 kg (9.0 lbs.) (Leads for wiring not included) Maximum power output ...130 W × 4 / 300 W × 2 (EIAJ) Continuous power output 65 W × 4 (at 14.4 V, 4 Ω, 20 - 20,000 Hz, 0.04% THD) 150 W × 2 (at 14.4 V, 4 Ω, 20 - 20,000 Hz, 0.4% THD) 75 W × 4 (at 14.4 V, 2 Ω, 20 - 20,000 Hz, 0.4% THD) Load impedance ...4 Ω (1 - 8 Ω allowable) (Bridge connection: 2 - 8 Ω allowable) Frequency response ...10 - 50,000 Hz (+0 dB, -1 dB) Signal-to-noise ratio ...105 dB (IHF-A network) Distortion ...0.003% (10 W, 1 kHz) Separation ...70 dB (1 kHz) Low pass filter ...Cut off frequency: 50 - 120 Hz Cut off slope: -12 dB/oct High pass filter ...Cut off frequency: 50 - 120 Hz Cut off slope: -12 dB/oct Input level / impedance ...0.4 - 6.5 V/22 kΩ Note: • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. Power source ...14.4 V DC (10.8 - 15.1 V allowable) Grounding system ...Negative type Current consumption ...39 A (at continuous power, 4 Ω) Average current drawn* ...11 A (4 Ω for four channels) 18 A (4 Ω for two channels) Fuse ...30 A × 2 Dimensions ...255 (W) × 61 (H) × 310 (D) mm Weight ...4.1 kg (Leads for wiring not included) [10 (W) × 2-3/8 (H) × 12-1/4 (D) in.] Maximum power output ...130 W × 4 / 300 W × 2 (EIAJ) Continuous power output (GM-X924/X1R/EW 110 W × 4 / 220 W × 2 (DIN45324, +B=14.4 V) Continuous power output (GM-X924/X1R/UC, ES 65 W × 4 (at 14.4 V, 4Ω, 20 - 20,000 Hz, 0.04% THD) 150 W × 2 (at 14.4 V, 4Ω, 20 - 20,000 Hz, 0.4% THD) 75 W × 4 (at 14.4 V, 2Ω, 20 - 20,000 Hz, 0.4% THD) Load impedance ...4 Ω (1 - 8 Ω allowable) (Bridge connection: 2 - 8 Ω allowable) Frequency response ...10 - 50,000 Hz (+0 dB, -1 dB) Signal-to-noise ratio ...105 dB (IEC-A network) Distortion ...0.003% (10 W, 1 kHz) Separation ...70 dB (1 kHz) Low pass filter ...Cut off frequency: 50 - 120 Hz Cut off slope: -12 dB/oct High pass filter ...Cut off frequency: 50 - 120 Hz Cut off slope: -12 dB/oct Input level / impedance ...0.4 - 6.5 V/22 kΩ Note: • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. GM-X1024,GM-X924 33