Pioneer GM5400T Owner's Manual - Page 13
Specifications, Additional information - rms
UPC - 012562911533
View all Pioneer GM5400T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Additional information Appendix English Specifications Power source 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system Negative type Current consumption 30 A (at continuous power, 4 W) Average current drawn ......... 10 A (4 W for two channels) 19 A (4 W for one channel) Fuse 30 A × 2 Dimensions (W × H × D) ... 265 mm × 62 mm × 346 mm (10-3/8 in. ×2-1/2 in. × 1 ft. 2 in.) Weight 3.8 kg (Leads for wiring not included) Maximum power output ....... 250 W × 2 (4 W) / 760 W × 1 (4 W) Continuous power output ... 125 W × 2 (at 14.4 V, 4 W, 20 Hz to 20 kHz 0.2% THD) 380 W × 1 (at 14.4 V, 4 W, 20 Hz to 20 kHz 0.8% THD) 190 W × 2 (at 14.4 V, 2 W, 20 Hz to 20 kHz 0.8% THD) Load impedance 4 W (2 W to 8 W allowable) (Bridge connection: 4 W to 8 W allowable) Frequency response 10 Hz to 50 kHz (+0 dB, -1 dB) Signal-to-noise ratio 95 dB (IHF-A network) Distortion 0.03 % (10 W, 1 kHz) Separation 70 dB (1 kHz) Low pass filter: Cut off frequency 80 Hz Cut off slope 12 dB/oct Bass boost: Frequency 50 Hz Level 0 dB/6 dB/12 dB Gain control: RCA 200 mV to 6.5 V Speaker 0.8 V to 26 V Maximum input level / impedance: RCA 6.5 V / 22 kW Speaker 26 V / 90 kW CEA2006 Specifications Power output 125 W RMS × 2 Channels (at 14.4 V, 4 W and ≦ 1 % THD+N) 380 W RMS × 1 Channels (at 14.4 V, 4 W BRIDGE and ≦ 1 % THD+N) 190 W RMS × 2 Channels (at 14.4 V, 2 W and ≦ 1 % THD+N) S/N ratio 75 dBA (reference: 1 W into 4 W) Notes ! Specifications and the design are subject to modifications without notice due to improvements. ! The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. En 13