Pioneer GM5400T Owner's Manual - Page 9

Connecting the units Section 03 English One-channel output Connecting the power terminal ! The use of a special red battery and ground wire RD-223, available separately, is recommended. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body. 1 Speaker (Mono) Connections when using the speaker input wire Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire. ! Do not connect both the RCA input and the speaker input at the same time. WARNING If the battery wire is not securely fixed to the terminal using the terminal screws, there is a risk of overheating, malfunction and injury, including minor burns. 1 Route battery wire from engine compartment to the vehicle interior. After completing all other amplifier connections, finally connect the battery wire terminal of the amplifier to the positive (+) battery terminal. 1 Car Stereo 2 Speaker output 3 Gray: Right + 4 Gray/black: Right * 5 White/black: Left * 6 White: Left + 7 Speaker input connector To speaker input terminal of this unit. 1 Positive (+) terminal 2 Engine compartment 3 Vehicle interior 4 Fuse (30 A) × 2 5 Insert the O-ring rubber grommet into the vehicle body. 6 Drill a 14 mm hole into the vehicle body (1/2 inch) . En 9