Pioneer HTZ-77DV Owner's Manual - Page 62

9 Advanced Sound Settings Dynamic Range Control The dynamic range of a source is the difference between the quietest and the loudest sounds. The dynamic range of Dolby Digital soundtracks can be very great. This makes them exciting, but it also means that when you turn the volume down you can easily lose quiet dialog. Switch on Dynamic Range Control to even out the soundtrack volume. 1 Press SYSTEM SETUP. • Access this function together with the SHIFT button. 2 Press the 2 or 3 button until you see D. R.C. in the display. 3 Use the 5 and ∞ buttons to select a dynamic range setting. • D.R.C. OFF Default setting (no change to the dynamics) • D.R.C. LOW Dynamic range is reduced by a small amount. • D.R.C. MEDIUM Mid setting • D.R.C. HIGH Dynamic range is reduced by a large amount (good for listening at very low volume). f d d j d f f 1 ܲ SYSTEM SETUPf ÷㕐ΝࣛܲSHIFT f 2 ܲ2‫א‬3ܲඐd D.R.C.f 3 ͜5 f ÷㕐D.R.C. OFF D.R.C. LOW D.R.C. MEDIUM D.R.C. HIGH ࣛ༰Գ 4 ܲENTERண֛f 4 Press ENTER to make the setting. LFE Attenuator Use the LFE (Low Frequency Effects) attenuator to reduce the subwoofer level if it is distorting. 1 Press SYSTEM SETUP. • Access this function together with the SHIFT button. 2 Press the 2 or 3 button until you see LFE ATT in the display. 3 Use the 5 and ∞ buttons to select a dynamic range setting. • LFE ATT 0 Default setting (no attenuation) • LFE ATT 10 The LFE channel is attenuated (reduced) by 10dB. • ATT OFF The LFE channel is switched off. LFEসಯኜ d Low Frequency Effects f 1 ܲSYSTEM SETUPf SHIFT f 2 ܲ2‫א‬3ܲඐd LFE ATTf 3 ͜5 f ÷㕐LFE ATT 0 LFE ATT 10 ATT OFF 4 ܲENTERண֛f 4 Press ENTER to make the setting. 62 En/ChH