Pioneer HTZ-940DV Owner's Manual - Page 83
DVD/CD/Video CD player
View all Pioneer HTZ-940DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Additional information 12 English Italiano Français Deutsch Nederlands Español Problem Remedy Timer indicator is blinking and the system will not switch on. • Unplug the unit, then plug back in. Wait for one minute then switch on. • Make sure the fan at the AMP section of the unit is not being blocked. • Check that the speakers are connected correctly. • If the problem persists, take it to your nearest Pioneer authorized service center or your dealer for servicing. DVD/CD/Video CD player Problem Remedy The disc is ejected automatically after loading. • Clean the disc. • Align the disc properly in the disc guide. • If the region number on a DVD-video disc does not match the number on the player, the disc cannot be used (see DVD Video regions on page 78). • Allow time for any condensation inside the player to evaporate. Avoid using the player near an air-conditioning unit. Playback is not possible. • If the disc is loaded upside down, reload the disc with the label side face up. Picture playback stops and the operation • Press (stop), then (play) to start playback again. • Switch the power off once, then on again using the front panel buttons cannot be used. STANDBY/ON button. Settings are canceled. • When the power is cut due to power failure or by unplugging the power cable, settings will be canceled. No picture/No color. • Check that connections are correct and that plugs are inserted fully. • Check the instruction manual of the TV/monitor to make sure the TV/ monitor settings are incorrect. • If your TV/monitor is connected using an S-video cable, try changing the S-Video Out setting (see S-Video Out on page 66). Screen is stretched or aspect does not change. • The TV Screen setting is incorrect. Set the TV Screen option to match the TV/monitor you're using (see TV Screen on page 64). When recorded on a • This system uses copy-protection technology which may prevent VCR or passed through recording or cause picture problems when connected through a VCR or AV an AV selector, there is selector. This is not a malfunction. disturbance in the playback picture. 83 En