Pioneer HTZ-940DV Owner's Manual - Page 85

Error Messages

Page 85 highlights

Additional information 12 English Italiano Français Deutsch Nederlands Español Tuner Problem Remedy Considerable noise in radio broadcasts. • Connect the antenna (refer to the Setup Guide). • Fully extend the FM wire antenna, position for best reception, and secure to a wall. • Connect an outdoor FM antenna (see Connecting external antennas on page 73). • Adjust the direction and position for best reception. • Connect an additional internal or external AM antenna (refer to the Setup Guide and Connecting external antennas on page 73). • Turn off any other equipment that may be causing the noise or move it away from the main unit. • The tuning interval is incorrect for your country or region. Try switching the tuning interval (frequency step) (see Changing the frequency step on page 77). Auto tuning does not • The radio signal is weak. Auto tuning will only detect radio stations with a pick up some stations. good signal. For more sensitive tuning, connect an outdoor antenna. Sound is mono only. • Check that the tuner is not set to FM mono (see Improving poor FM reception on page 29). Error Messages Message Child Lock Rec Mode On Phones In 96K Stereo No Surr. SP Muting Exit Desciption • This message appears when the front panel buttons are pressed when the child lock feature is active. See Child Lock on page 77 for more on switching on/off the child lock. • Blinks rapidly for 2 seconds when an operation is prohibited because the Recording Mode is on (see Recording mode on page 75). • Blinks rapidly for 2 seconds when an operation is prohibited because headphones are connected. • Blinks rapidly for 2 seconds when an operation is prohibited because the source is digital 88.2 or 96kHz PCM. • Blinks rapidly for 2 seconds when an operation is prohibited because there is no surround speaker output. • Blinks rapidly for 2 seconds when an operation is prohibited because the sound is muted (see Muting the sound on page 37). • Appears briefly when a menu is automatically exited after a set period of inactivity. 85 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197

Additional information
12
85
En
English
Italiano
Français
Nederlands
Español
Deutsch
Tuner
Error Messages
Problem
Remedy
Considerable noise in
radio broadcasts.
• Connect the antenna (refer to the Setup Guide).
• Fully extend the FM wire antenna, position for best reception, and secure
to a wall.
• Connect an outdoor FM antenna (see
Connecting external antennas
on
page 73).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and
Connecting external antennas
on page 73).
• Turn off any other equipment that may be causing the noise or move it
away from the main unit.
• The tuning interval is incorrect for your country or region. Try switching
the tuning interval (frequency step) (see
Changing the frequency step
on
page 77).
Auto tuning does not
pick up some stations.
• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.
Sound is mono only.
• Check that the tuner is not set to FM mono (see
Improving poor FM
reception
on page 29).
Message
Desciption
Child Lock
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See
Child Lock
on page 77 for more on
switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see
Recording mode
on page 75).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
96K Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (see
Muting the sound
on page 37).
Exit
• Appears briefly when a menu is automatically exited after a set period of
inactivity.