Pioneer MJ-D707 Service Manual - Page 3
Mj-d707, Mj-17d, Label Check - md
View all Pioneer MJ-D707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
MJ-D707, MJ-17D IMPORTANT THIS PIONEER APPARATUS CONTAINS LASER OF CLASS 1. SERVICING OPERATION OF THE APPARATUS SHOULD BE DONE BY A SPECIALLY INSTRUTED PERSON. LASER DIODE CHARACTERISTICS MAXIMUM OUTPUT POWER: 32 mw WAVELENGTH: 785 nm LABEL CHECK MY and MY/GR/FR types Additional Laser Caution Laser pick-up assembly The output power at the objective lens of this assembly is 0.73 mW. Control method of the current through a laser diode. The resistor R105 on the CORD MAIN UNIT ASSY (For MD mechanism assembly) are for the limiting of current through a laser diode. Control method of the laser output power The laser pick-up assembly provide the photo-diodes and APC (Auto Power Control) circuit. The photo-diode detect output of the laser diode then IC104 control the APC circuit according to the signal voltage of the photo-diode via IC101. The Variable resistancer on the FPC in the Laser pick-up assembly can be adjusted the output level of Laser diode to fix the rated output level. Laser Interlock Switch The loading position detect switch S101 is set to " LOAD ON " (ON: low level, OFF: high level) position, IC104 get the " LOAD " signal, and hand the laser " LDON " signal to No. 9 terminal (LDON) of the Laser pick-up assembly. Then a laser diode can be lighted exept when the level of signal "LOAD " is low. ∗ Refer to page 42. 3