Pioneer MVH-S310BT Owners Manual - Page 30
Bluetooth device
View all Pioneer MVH-S310BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English SKIPPED → The connected USB device contains DRM protected files. - The protected files are skipped. PROTECT → All the files on the connected USB device are embedded with DRM. - Replace the USB device. N/A USB → The connected USB device is not supported by this unit. - Disconnect your device and replace it with a compatible USB device. HUB ERROR → The USB device connected via a USB hub is not supported by this unit. - Connect the USB device directly to this unit using a USB cable. CHECK USB → The USB connector or USB cable has short-circuited. - Check that the USB connector or USB cable is not caught in something or damaged. → The connected USB device consumes more than maximum allowable current. - Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices. ERROR-19 → Communication failed. - Perform one of the following operations, then return to the USB source. • Disconnect the USB device. • Change to a different source. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is displayed, reconnect the iPhone and reset it. ERROR-23 → USB device was not formatted properly. - Format the USB device with FAT12, FAT16 or FAT32. ERROR-16 → The iPhone firmware version is old. - Update the iPhone version. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is displayed, reconnect the iPhone and reset it. STOP → There are no songs in the current list. - Select a list that contains songs. NO BT DEVICE GO TO BT MENU TO REGISTER → No Bluetooth device found. - Connect the unit and iPhone via Bluetooth (page 10). CONN. FAILED PRESS BAND KEY TO RETRY → Bluetooth connection with iPhone failed. - Press BAND/ to make a connection again. DISCONNECTED PRESS BAND KEY TO RETRY → Bluetooth connection lost. - Press BAND/ to make a connection again. Bluetooth device ERROR-10 → The power failed for the Bluetooth module of the unit. - Turn the ignition switch OFF and back to ACC or ON. - 30 -